Re: Scalextric model racing club Sunday 1st
Posted:
Mon Feb 17, 2020 11:22 am
by leopard
Will have to check, should be around for this (if not can bring the big box etc down anyway)
Certainly up for it though
Re: Scalextric model racing club Sunday 1st
Posted:
Mon Feb 17, 2020 2:24 pm
by leopard
davec wrote:Me too
I didn't want first place anyway...
*kicks cat*
Re: Scalextric model racing club Sunday 1st
Posted:
Mon Feb 17, 2020 6:23 pm
by Tiger 1
Re: Scalextric model racing club Sunday 1st
Posted:
Mon Feb 17, 2020 6:53 pm
by leopard
having checked with my personal disorganiser we are indeed about on the 1st so will be down.
not about this Wednesday but will be down Saturday, probably gaming in the afternoon but will bring some bits down to sort that transformer out for four track running, may also wish to borrow your dremel for a few minutes to torture a bit of track and run a few tests after...
Re: Scalextric model racing club Sunday 1st
Posted:
Sun Feb 23, 2020 7:10 pm
by leopard
Considering a circuit similar to the last one if we go for the same space, two lane lap counting/timing is definitely possible, I doubt the four lane version will be operational and robust by then.
Thinking opening the end corners up slightly so the corner radius varies a bit as you go round, may also try and make the back straight a bit longer.. have found a few more straight lengths, and can pinch the ones from the other circuit. Will still be an analogue track for now
Open to suggestions on a track, don't think I have the bits to make 4 lanes just yet
Re: Scalextric model racing club Sunday 1st
Posted:
Sun Feb 23, 2020 8:23 pm
by Baldie
Will be recovering in Brighton but hope you all have a fab time.
Re: Scalextric model racing club Sunday 1st
Posted:
Mon Feb 24, 2020 7:53 pm
by leopard
May have someone from Rotherham way wandering over, mentioned as looking for a club in the general area on
https://www.slotforum.com/forums/index.php?showtopic=194121 so figured it was worth sticking a flag up
Idea of someone with a clue is a bit scary...