Glueing plastic mini to polystyrene?

Found a good way of doing something? or looking for help solving a problem?

Glueing plastic mini to polystyrene?

Postby GuEsTy » Wed Dec 14, 2016 9:59 pm

Hi good folks was wondering it its possible to glue plastic minis to polystyrene and what glue to use? Thanks.
GuEsTy
 
Posts: 694
Joined: Sun Oct 04, 2015 11:06 am
Location: Wombwell

Re: Glueing plastic mini to polystyrene?

Postby leopard » Wed Dec 14, 2016 10:12 pm

What sort of polystyrene? if you mean the white expanded stuff like used for packaging then it depends how long you want the bond to last, given the base material will fall apart anyway simple PVA (but decent quality, though get water soluble) may be a good bet - anything stronger will be far stronger that the stuff you're gluing it to. If you're using PVA to stick other stuff to it then it will all bond together anyway.

Whatever you use try it on a bit of polystyrene first and leave for a good few hours to see if it reacts and melts it as a lot of solvent based glues will
User avatar
leopard
 
Posts: 3647
Joined: Sun Mar 30, 2014 6:55 pm
Location: Wombwell, Barnsley

Re: Glueing plastic mini to polystyrene?

Postby GuEsTy » Wed Dec 14, 2016 10:25 pm

Yes that's the exact stuff leopard. Was pondering making a bit of base terrain out of polystyrene and sticking a plastic mini to it but wasn't sure the kind of bond would achieve using pva, presuming plastic glue is far too strong.
GuEsTy
 
Posts: 694
Joined: Sun Oct 04, 2015 11:06 am
Location: Wombwell

Re: Glueing plastic mini to polystyrene?

Postby leopard » Wed Dec 14, 2016 10:34 pm

Plastic glue will melt it and make a royal mess.

Another way depends what you are using as a base. Drill a hole and have a bit of wire where said model is going. Make your terrain then clip the wire to leave a bit exposed. Drill a hole in said model and glue to the wire?

Otherwise a decent grip PVA should work and won't damage the model if it comes off. When you just glue it back down.

Try it on a smaller bit of something
User avatar
leopard
 
Posts: 3647
Joined: Sun Mar 30, 2014 6:55 pm
Location: Wombwell, Barnsley

Re: Glueing plastic mini to polystyrene?

Postby virusoverload » Thu Dec 15, 2016 12:22 pm

the polystyrene will either melt from the glue or will break after a little cos its so brittle. like Dale said try running a pin all the way through to something solid.
virusoverload
 
Posts: 748
Joined: Sun Jan 25, 2015 6:59 pm

Re: Glueing plastic mini to polystyrene?

Postby leopard » Thu Dec 15, 2016 12:42 pm

of course also if you're covering the top with say grit or scatter anyway, or indeed filler, then make your bit of terrain, with whatever covers it, then glue the model to that, e.g. a layer of sand glued on with pva, then soaked with dilute pva becomes pretty tough, you can superglue a models foot to that.

Really depends exactly what you are trying to do, the one to talk to is big Paul, who works wonders on terrain, if anything is possible he'll know how

:woo:
User avatar
leopard
 
Posts: 3647
Joined: Sun Mar 30, 2014 6:55 pm
Location: Wombwell, Barnsley

Re: Glueing plastic mini to polystyrene?

Postby GuEsTy » Thu Dec 15, 2016 2:00 pm

Thanks for advice guys.
GuEsTy
 
Posts: 694
Joined: Sun Oct 04, 2015 11:06 am
Location: Wombwell


Return to Hints, Tips, Techniques and Help

Who is online

Users browsing this forum: No registered users and 2 guests

cron